Re: [partial-reconfig] Error message from Router (ISE7.1i) - DPR implementation

[DPR DPR <b_kk1@xxxxxxxxx>]

Thanks for your reply..

 

i have following lines in my ucf other than PIN locations...

 

INST "increm" AREA_GROUP = "AG_increm" ;

AREA_GROUP "AG_increm" RANGE = SLICE_X0Y159:SLICE_X43Y0 ;

AREA_GROUP "AG_increm" RANGE = TBUF_X0Y159:TBUF_X42Y0 ;

AREA_GROUP "AG_increm" RANGE = RAMB16_X0Y0:RAMB16_X0Y19, RAMB16_X1Y1:RAMB16_X1Y18, RAMB16_X2Y0:RAMB16_X2Y19, RAMB16_X3Y1:RAMB16_X3Y18 ;

AREA_GROUP "AG_increm" RANGE = MULT18X18_X0Y0:MULT18X18_X0Y19, MULT18X18_X1Y1:MULT18X18_X1Y18, MULT18X18_X2Y0:MULT18X18_X2Y19, MULT18X18_X3Y1:MULT18X18_X3Y18 ;

 

 

INST "myReg" AREA_GROUP = "AG_myReg" ;

AREA_GROUP "AG_myReg" RANGE = SLICE_X44Y159:SLICE_X91Y0 ;

AREA_GROUP "AG_myReg" RANGE = TBUF_X44Y159:TBUF_X90Y0 ;

AREA_GROUP "AG_myReg" RANGE = RAMB16_X4Y1:RAMB16_X4Y18, RAMB16_X5Y0:RAMB16_X5Y19, RAMB16_X6Y1:RAMB16_X6Y18, RAMB16_X7Y0:RAMB16_X7Y19 ;

AREA_GROUP "AG_myReg" RANGE = MULT18X18_X4Y1:MULT18X18_X4Y18, MULT18X18_X5Y0:MULT18X18_X5Y19, MULT18X18_X6Y1:MULT18X18_X6Y18, MULT18X18_X7Y0:MULT18X18_X7Y19 ;

 

 

 

INST "busRegToInc/bus1" LOC = "TBUF_X40Y140" ;

INST "busRegToInc/bus2" LOC = "TBUF_X40Y142" ;

INST "busIncToReg/bus1" LOC = "TBUF_X40Y144" ;

INST "busIncToReg/bus2" LOC = "TBUF_X40Y146" ;

Thanks for your help..

-karthik

 

Pete Sedcole <pete.sedcole@xxxxxxxxxxxxxx> wrote:

DPR DPR wrote:

 

EXCEPTION: XCAD_HDHelpers.c:596:1.8.10.1 ? Missing Range value string delimiter. FATAL_ERROE:par:Portaility/export/Port_Main.h:127:1.12.12.6 ? This

Looks like a problem with an area group definition. What area group constraints do you have in the ucf file?

___________________________ partial-reconfig mailing list partial-reconfig@xxxxxxxxxxxxxx Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/

---

How low will we go? Check out Yahoo! Messenger?s low  PC-to-Phone call rates.