Re: [partial-reconfig] Error message from Router (ISE7.1i) - DPR implementation

[DPR DPR <b_kk1@xxxxxxxxx>]

hi   "Pete" and "lu, yi"
        Thanks for your suggestions.. now PAR is working well..

-karthik


yilu@xxxxxxxxxxxxxx wrote:

Hi, You may try to manully rewrite these automaticlly created RANGEs for each
AREA_GROUP into one RANGE _expression_ see if it helps. e.g.
AREA_GROUP "AG_increm" RANGE = SLICE_X0Y159:SLICE_X43Y0,TBUF_X0Y159:TBUF_X42Y0,
RAMB16_X0Y0:RAMB16_X0Y19,
RAMB16_X1Y1:RAMB16_X1Y18, RAMB16_X2Y0:RAMB16_X2Y19, RAMB16_X3Y1:RAMB16_X3Y18...;

I met similar problem when I did my partial system. And it worked when in one
RANGE _expression_.

lu, yi

Quoting DPR DPR :

> Thanks for your reply..
>
> i have following lines in my ucf other than PIN locations...
>
> INST "increm" AREA_GROUP = "AG_increm" ;
> AREA_GROUP "AG_increm" RANGE = SLICE_X0Y159:SLICE_X43Y0 ;
> AREA_GROUP "AG_increm" RANGE = TBUF_X0Y159:TBUF_X42Y0 ;
> AREA_GROUP "AG_increm" RANGE = RAMB16_X0Y0:RAMB16_X0Y19,
> RAMB16_X1Y1:RAMB16_X1Y18, RAMB16_X2Y0:RAMB16_X2Y19, RAMB16_X3Y1:RAMB16_X3Y18
> ;
> AREA_GROUP "AG_increm" RANGE = MULT18X18_X0Y0:MULT18X18_X0Y19,
> MULT18X18_X1Y1:MULT18X18_X1Y18, MULT18X18_X2Y0:MULT18X18_X2Y19,
> MULT18X18_X3Y1:MULT18X18_X3Y18 ;
>
>
> INST "myReg" AREA_GROUP = "AG_myReg" ;
> AREA_GROUP "AG_myReg" RANGE = SLICE_X44Y159:SLICE_X91Y0 ;
> AREA_GROUP "AG_myReg" RANGE = TBUF_X44Y159:TBUF_X90Y0 ;
> AREA_GROUP "AG_myReg" RANGE = RAMB16_X4Y1:RAMB16_X4Y18,
> RAMB16_X5Y0:RAMB16_X5Y19, RAMB16_X6Y1:RAMB16_X6Y18, RAMB16_X7Y0:RAMB16_X7Y19
> ;
> AREA_GROUP "AG_myReg" RANGE = MULT18X18_X4Y1:MULT18X18_X4Y18,
> MULT18X18_X5Y0:MULT18X18_X5Y19, MULT18X18_X6Y1:MULT18X18_X6Y18,
> MULT18X18_X7Y0:MULT18X18_X7Y19 ;
>
>
>
> INST "busRegToInc/bus1" LOC = "TBUF_X40Y140" ;
> INST "busRegToInc/bus2" LOC = "TBUF_X40Y142" ;
> INST "busIncToReg/bus1" LOC = "TBUF_X40Y144" ;
> INST "busIncToReg/bus2" LOC = "TBUF_X40Y146" ;
>
> Thanks for your help..
> -karthik
>
>
> Pete Sedcole wrote:
>
> DPR DPR wrote:
> EXCEPTION: XCAD_HDHelpers.c:596:1.8.10.1 ? Missing Range value string
> delimiter. FATAL_ERROE:par:Portaility/export/Port_Main.h:127:1.12.12.6 ? This
>
>
>
> Looks like a problem with an area group definition. What area group
> constraints do you have in the ucf file?
>
> ___________________________ partial-reconfig mailing list
> partial-reconfig@xxxxxxxxxxxxxx Mailing List Archive :
> http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>
>
> ---------------------------------
> How low will we go? Check out Yahoo! Messenger?s low PC-to-Phone call rates.



___________________________
partial-reconfig mailing list
partial-reconfig@xxxxxxxxxxxxxx
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/

---

Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.