Re: [partial-reconfig] Re: [microblaze-uclinux] Adding bootloop to a bitstream made outside EDK

[Pete Sedcole <pete.sedcole@xxxxxxxxxxxxxx>]

Hi David

See below.

David Montminy wrote:
> ERROR:Data2MEM:89 - Unrecognized register address 10 in .bit file,
> 'static_full.bit'.

This sounds like a problem with the generated bit file. It could be 
referring to a write to a non-existent configuration register. In the 
Virtex II I think configuration register 10 is reserved.

In the log file, there seems to be several lines like the following:

> mpd line 67 - tool overriding c_family value virtex2 to
> microblaze (microblaze_0) -
> C:\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v5_00_a\data\microblaze_v2_1_0.
>   

It seems that the device family is being set to nothing. What device are 
you using? You'll need to make sure that the tool sets the family correctly.


Regards
Pete
___________________________
partial-reconfig mailing list
partial-reconfig@xxxxxxxxxxxxxx
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/