[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [partial-reconfig] Error when testing DPRtutorial More options
Hi,
Using 7.1 for partial system is not a good choice. Try 6.3+pack2 or 8.2.
They are working(I tried my system on these two versions).
luyi
>
> > On Friday 06 April 2007 12:12, Hedi Abdelkrim wrote:
> > > I really need help please, I'm using ISE 7.1 and trying to test The
> > > DPR tutorial, and the assembling phase when exexcuting map command . It
> > > returns an error. The Error message is that one :
> > > Loading database for application par from file:
> > > "..\Pim/incrementer/incrementer.ncd"
> > > "top" is an NCD, version 3.1, device xc2s200, package pq208, speed -6
> > > Loading database for application par from file:
> > > "..\Pim/myRegister/myRegister.ncd"
> > > "top" is an NCD, version 3.1, device xc2s200, package pq208, speed -6
> > > FATAL_ERROR:Par:Portability/export/Port_Main.h:127:1.12.12.6 - This
> > > application has discovered an exceptional condition from which it
> > > cannot recover. Process will terminate. To resolve this error, please
> > > consult the Answers Database and other online resources at
> > > http://support.xilinx.com. If you need further assistance, please open
> > > a Webcase by clicking on the "WebCase" link at
> > > http://support.xilinx.com
> > >
> > > The ucf file is the next :
> > > AREA_GROUP "AG_myReg" MODE=RECONFIG;
> > > AREA_GROUP "AG_increm" MODE=RECONFIG;
> > > # Start of Constraints extracted by Floorplanner from the Design
> > > INST "bufg_clk" LOC = "GCLKBUF2" ;
> > > NET "zeroR" LOC = "P181" ;
> > > NET "zeroL" LOC = "P191" ;
> > > NET "result(7)" LOC = "P95" ;
> > > NET "result(6)" LOC = "P96" ;
> > > NET "result(5)" LOC = "P97" ;
> > > NET "result(4)" LOC = "P98" ;
> > > NET "result(3)" LOC = "P99" ;
> > > NET "result(2)" LOC = "P100" ;
> > > NET "result(1)" LOC = "P101" ;
> > > NET "result(0)" LOC = "P102" ;
> > > NET "reset" LOC = "P140" ;
> > > NET "oneR" LOC = "P180" ;
> > > NET "oneL" LOC = "P192" ;
> > > NET "enable" LOC = "P139" ;
> > > NET "clk" LOC = "GCLKPAD2" ;
> > > INST "increm" AREA_GROUP = "AG_increm" ;
> > > AREA_GROUP "AG_increm" RANGE = CLB_R1C1:CLB_R28C19 ;
> > > AREA_GROUP "AG_increm" RANGE = TBUF_R1C1:TBUF_R28C19 ;
> > > AREA_GROUP "AG_increm" RANGE = RAMB4_R0C0:RAMB4_R6C0 ;
> > > INST "myReg" AREA_GROUP = "AG_myReg" ;
> > > AREA_GROUP "AG_myReg" RANGE = CLB_R1C20:CLB_R28C42 ;
> > > AREA_GROUP "AG_myReg" RANGE = TBUF_R1C20:TBUF_R28C42 ;
> > > AREA_GROUP "AG_myReg" RANGE = RAMB4_R0C1:RAMB4_R6C1 ;
> > > INST "busRegToInc/bus1/t1A_(3)/TRISTATE" LOC = "TBUF_R17C16.0" ;
> > > INST "busRegToInc/bus2/t1A_(3)/TRISTATE" LOC = "TBUF_R19C16.0" ;
> > > INST "busIncToReg/bus1/t1E_(3)/TRISTATE" LOC = "TBUF_R21C16.0" ;
> > > INST "busIncToReg/bus2/t1E_(3)/TRISTATE" LOC = "TBUF_R23C16.0" ;
> > >
> > >
> > > ---------------------------------
> > > Découvrez une nouvelle façon d'obtenir des réponses à toutes vos
> > > questions ! Profitez des connaissances, des opinions et des expériences
> > > des internautes sur Yahoo! Questions/Réponses.
___________________________
partial-reconfig mailing list
partial-reconfig@xxxxxxxxxxxxxx
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/