Re: [partial-reconfig] About PAR errors of EAPR

["Xi Jin" <xjin.neu@xxxxxxxxx>]

Hi Enno,

Thanks for your letter!

But the signals that's between PRM and IO do not cross through the
static part. Thus, is BM necessary?

Best regards,
JinXi


2007/10/10, Enno Luebbers <enno.luebbers@xxxxxxxxxxxxxxxx>:
> Hi Jin Xi,
> > ERROR: Net a2_IBUF crosses a region boundary and is not part of a
> > slice macro.
> >
> >        Nets crossing region boundaries must be part of a slice macro
> >
> It appears that you did not route your PRM's external signals through
> bus macros. Every signal (except for global clocks) that's between
> your recofigurable modules and the static part of your design has to
> be routed through a bus macro. I think there's a section on that at
> the beginning of the EAPR user guide.
>
> Best,
> Enno
> --
> Dipl.-Ing. Enno Lübbers
> Fachgebiet Technische Informatik
> Universität Paderborn
>
> Warburger Str. 100
> 33098 Paderborn
>
> http://wwwcs.upb.de/cs/ag-platzner
> Telefon: 05251 / 60-5397
> Telefax: 05251 / 60-5377
>
>
>
>
> ___________________________
> partial-reconfig mailing list
> partial-reconfig@xxxxxxxxxxxxxx
> Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/
>

___________________________
partial-reconfig mailing list
partial-reconfig@xxxxxxxxxxxxxx
Mailing List Archive : http://www.itee.uq.edu.au/~listarch/partial-reconfig/