[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[partial-reconfig] Partial reconfiguration on ML40X board
- To: partial-reconfig@xxxxxxxxxxxxxx
- Subject: [partial-reconfig] Partial reconfiguration on ML40X board
- From: "Guido Vagliasindi" <gvaglia@xxxxxxxxx>
- Date: Mon, 5 Nov 2007 18:10:18 +0100
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:message-id:date:from:to:subject:mime-version:content-type; bh=7hiPu63N0wF7IcRaSMHZy08IPMUIY4RKaCPmsK00Wd0=; b=CpvaiE5Jc6OkSJnlBHF0CaczTnKOtdIptYjyW1SG4uSmdbk/Cg6FHk8AUdF68J2MzgaKIGkVX1PbHI/Hwv/xVAtLK7Mit/BgFKwhjKe7u44SIzpDhza/gwW3QiiFRmvp0d076dcj5bT0N790t1qM0MH9OxYphS7y+F5hGPkAYbE=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:mime-version:content-type; b=lsQl7z2Uml97EgzL/ACEEEaQXhuBDN/VHJtOrXNWdsbN2yrRJIv6zhUHN+u21COy5gzsCKj+g9QUjJ8qSXPKYDZHz1A6+Lo0PHFMvw3YGtEPp9JCLKbX63QvMXGq0WAAs3BRa/Hfwb0Zt4WAvzXnWBiSrG/xnlfj3xzgaThcCX4=
- Reply-to: partial-reconfig@xxxxxxxxxxxxxx
- Sender: owner-partial-reconfig@xxxxxxxxxxxxxx
Dear all,
I tried to find this information in the previous posts but without success.
It is my first attempt of partial reconfiguration on Virtex-4 and my first experience with ML402 board so I hope that my question is not so silly.
In order to perform a partial reconfiguration using impact which configuration mode should I use (Master, slave, JTAG)?
Do I have to connect the USB cable programmer to the JTAG port or to the pins on the J3 connector?
The Switch 12, the one that permits to switch among CPLD Flash, PLAT Flash, SYS ACE in what position should be placed?
Thanks to everybody
Guido