> I'm using EDK
9.1.02. ICAP module is opb_hwicap 1.10.a and the driver is
> 1.00.c.
> I tried that function but it doesn't work.
>
> Regards,
> Paolo Furia
>
>
> 2008/8/27 Lu Yi <
yilu@xxxxxxxxxxxxxxxxxxxxx>
>
>> Hi, Paolo,
>>
>> I am using the EDK8.2.02 to build the main system, my board is ML410,
>> the
>> partial reconfiguration by using CF as the bitstream storage is fine. I
>> just use XHwIcap_CF2Icap(&MyIcap, "my.bit") to load the new partial
>> bitstream, it works fine.
>>
>> Which version of your EDK? Which version of your ICAP module and the
>> ICAP
>> driver?
>>
>> regards,
>> luyi
>>
>> > Hi all,
>> > I'm working on a dynamically reconfigurable project on ML402 (virtex-4
>> > sx35) and, for this, I have to load partial bitstreams from a Compact
>> > Flash. I successfully generated a system.ace file that works fine and
>> > configure my fpga at turn on. The problems come when I try to load a
>> > partial bitstream stored on the CF: it always isn't possible and the
>> > error led turn on.
>> > I mainly use sysace_fopen and sysace_fread functions (I also tried
>> using
>> > directly the function XHwIcap_CF2Icap provided by Xilinx in his
>> examples);
>> > only reading 2048 bytes it seems to read something, but not all.
>> > I tried to open and read an image .bmp, using sysace_fopen and
>> > sysace_fread, and it works. The problem comes with bitstreams
>> > (both .bit and .bin).
>> > I have this problem both in my reconfigurable system and in a normal
>> > system based on MicroBlaze.
>> >
>> > Have you any suggestion? Has anyone successfully reconfigured virtex-4
>> > devices using a bitstream stored on a CF? I would be grateful for your
>> > help.
>> >
>> >
>> > Paolo Furia
>> >
>>
>> ___________________________
>> partial-reconfig mailing list
>>
partial-reconfig@xxxxxxxxxxxxxx
>> Mailing List Archive :